 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| v02.0802 HMC314 GaAs InGaP HBT MMIC DRIVER AMPLIFIER, 0.7 - 4.0 GHz Features P1dB Output Power: +18 dBm Output IP3: +29 dBm Gain: 12 dB Single Supply: 5V Ultra Small Package: SOT26 8 AMPLIFIERS - SMT Typical Applications Ideal Broadband Gain Stage for: * 2.2 - 2.7 GHz MMDS * 3.5 GHz Wireless Local Loop * Low Profile Portable Wireless Devices * WLAN Systems Functional Diagram General Description The HMC314 is a GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC amplifier that operates from a single positive supply. This amplifier also incorporates a power down feature. When the "Vpd" pin is held low, the amplifier will shut down. The surface mount SOT26 amplifier can be used as a broadband gain stage for wideband applications. The amplifier provides 12 dB of gain and +22 dBm of saturated power while operating from a single positive +5v supply. The HMC314 is packaged in an ultra small SOT26 package at a height of only 1.45mm. Electrical Specifications, TA = +25 C Vs = +5V, Rbias = 10 Ohm Parameter Min. Frequency Range Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Reverse Isolation Output Power for 1 dB Compression (P1dB) @ 1 GHz Saturated Output Power (Psat) @ 1 GHz Output Third Order Intercept (IP3) @ 1 GHz Switching Speed Supply Current (Icc) Control Voltage (Vpd) Control Current (Ipd) On/Off 6 2 22 15 19 26 7 Typ. 0.7 - 4.0 12 0.015 12 6 30 18 22 29 60 150 0/5 .001/12 16 0.025 Max. GHz dB dB/C dB dB dB dBm dBm dBm ns mA Volts mA Units 8 - 74 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v02.0802 HMC314 GaAs InGaP HBT MMIC DRIVER AMPLIFIER, 0.7 - 4.0 GHz Gain & Return Loss 20 15 10 S11 S21 S22 Gain vs. Temperature 20 + 25 C + 65 C - 40 C 8 AMPLIFIERS - SMT 8 - 75 15 RESPONSE (dB) 5 0 -5 -10 -15 -20 -25 0 1 2 3 4 5 6 7 FREQUENCY (GHz) 0 0.5 5 GAIN (dB) 10 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) Input Return Loss vs. Temperature 0 + 25 C + 65 C - 40 C Output Return Loss vs. Temperature 0 -5 -4 RETURN LOSS (dB) -10 RETURN LOSS (dB) -8 -15 -12 + 25 C + 65 C - 40 C -20 -16 -25 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 -20 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) FREQUENCY (GHz) Reverse Isolation vs. Temperature 0 + 25 C + 65 C - 40 C -10 ISOLATION (dB) -20 -30 -40 -50 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v02.0802 HMC314 GaAs InGaP HBT MMIC DRIVER AMPLIFIER, 0.7 - 4.0 GHz 8 AMPLIFIERS - SMT P1dB vs. Temperature 25 Psat vs. Temperature 25 20 20 P1dB (dBm) 15 Psat (dBm) + 25 C + 65 C - 40 C 15 10 10 + 25 C + 65 C - 40 C 5 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) FREQUENCY (GHz) Power Compression @ 1 GHz 25 Power Compression @ 3 GHz 25 Pout (dBm), Gain (dB), PAE (%) 20 15 10 5 0 -5 -8 -6 -4 Pout (dBm), Gain (dB), PAE (%) Pout (dBm) Gain (dB) PAE (%) 20 15 10 5 0 -5 Pout (dBm) Gain (dB) PAE (%) -2 0 2 4 6 8 INPUT POWER (dBm) 10 12 14 16 -8 -6 -4 -2 0 2 4 6 8 INPUT POWER (dBm) 10 12 14 16 Output IP3 vs. Temperature 40 35 30 IP3 (dBm) 25 20 15 10 5 0 0.5 + 25 C + 65 C - 40 C 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) 8 - 76 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v02.0802 HMC314 GaAs InGaP HBT MMIC DRIVER AMPLIFIER, 0.7 - 4.0 GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) Control Voltage Range (Vpd) RF Input Power (RFin)(Vs = +5.0 Vdc) Junction Temperature Continuous Pdiss (T = 65 C) (derate 6.57 mW/C above 65 C) Thermal Resistance (junction to lead) Storage Temperature Operating Temperature +5.0 Vdc -0.2 to 3.5 Vdc +20 dBm 150 C 0.558 W Truth Table Vs 5V 5V Vctl 5V 0V Is 150 mA <1 A Ictl 12 mA <1 A State On Power Down 8 AMPLIFIERS - SMT 8 - 77 152 C/W -65 to +150 C -40 to +65 C Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 8. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v02.0802 HMC314 GaAs InGaP HBT MMIC DRIVER AMPLIFIER, 0.7 - 4.0 GHz 8 AMPLIFIERS - SMT Application Circuit Note: 1. Requires a 10 Ohm resistor (Rbias) in series with the Vcc line and a 160 Ohm resistor in series with the Vpd line. 2. Requires Blocking Capacitors on Pins 1 & 3. 3. Requires bypass capacitors on Vcc and Vpd line as shown. 8 - 78 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com v02.0802 HMC314 GaAs InGaP HBT MMIC DRIVER AMPLIFIER, 0.7 - 4.0 GHz Evaluation PCB 8 AMPLIFIERS - SMT List of Material Item J1, J2 J3, J4, J5 U1 PCB* Description PC Mount SMA Connector DC Pins HMC314 104198 Evaluation PCB 1.5" x 1.5" The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. *Circuit Board Material: Roger 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 79 |
Price & Availability of HMC31402
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |